The current models fit only on any standard size
2-piece toilet of 17.5" inches wide.
If you have a 1-Piece toilet that is shaped into one
unit that has no crevice between the tank and bowl, the Bidet HB-200
or HB-50 would not be able to fit on the toilet.
If you like to place a
special order for your 18" inches 1-piece toilet, please contact
us.
To know if bidet will fit
the size of your toilet, please email us:
1. The width of the back of
your toilet.
2. The length between the
two bolts that attach the toilet with the seat cover.
One-piece toilet
A toilet sculpted into a seamless unit. The result is a sleek toilet with no crevices between the tank and bowl.
Two-piece toilet
A toilet that have a separate tank and bowl that are bolted together upon installation.
Round Bowl
A measurement of inches from the middle of the two seat bolts on the back edge of the toilet (figure A) that equals to number 16.5 or less
Elongated Bowl
A measurement of inches from the middle of the two seat bolts on the back edge of the toilet (Figure A) that equals to number 16.5 or more.
*Bidet Measurements = 17.5" inches wide.
|